Note 1:
The SLC 5/01 and SLC 5/02 require the use of an Allen Bradley Communications Interface Module.

Graphic HMI Communications Cables

Three Easy Steps to Choose the Correct Cable for Your Graphic HMI:

1.  Locate your Controller Manufacturer by using the scroll bar on the right side of the table.

2.  Scroll down if necessary and locate the row with your particular Controller Model.

3.  Follow along that row to the right until you are underneath your particular HMI Series or HMI Model.

Important: If it is blank, it means that Maple Systems does not provide a cable or instructions for that particular controller and HMI. The word, “instructions” means that we do not make the cable but the instructions will show you how to do it yourself.

All cables are made to order and are non-refundable so please make sure you have ordered the proper cable for your unit.  If you are unsure, contact Customer Service for assistance. This information is subject to change without notice.

Click a “” button below to place an item in your shopping basket.
To continue shopping after that, simply click the “
” button on your browser window. 

Contact Maple Systems when ordering RS485 cables for the HMI5000HD.

Controller Manufacturer

Controller
Model

Comm. Type

Controller Connector Type

HMI5000
Series

HMI5043N/T