STEPware-100 Configuration Software
(MAP/MicroOIT/OIT Families)

Putting the MAP450D, MicroOIT Family, OIT Family & MAP Family operator interface terminals to work as ASCII terminals is amazingly simple. Our STEPware-100 configuration software lets you develop your application on any Windows-based PC. STEPware's intuitive interface and easy to navigate controls make it a snap to setup the communication parameters, enter the user-defined messages and configure the function keys. When your application is ready, just connect the OIT to your PC's RS-232 port, power up and download, it's that simple. And it's just as easy to modify your application in the future.

Sample Screens


  • Supports all MAP450D, MAP Family, MicroOIT Family & OIT Family ASCII & Motion Controller protocols in a single software package
  • Enables easy OIT configuration from a personal computer
  • Provides access to all configurable OIT functions and options
  • Transfers the protocol and application data to the OIT
  • Reads the application data from the OIT (for a previously configured OIT)
  • Full Windows compatibility—including menus, commands, and features

Minimum PC Requirements

  • 486SX/33MHz PC (Pentium recommended)
  • 4MB RAM (8MB recommended)
  • 2MB available hard disk space
  • VGA graphics card
  • Microsoft Windows 3.1 or higher
  • Available serial port

Demo Software

The demo version of STEPware-100 includes all the features and functions of the complete configuration software except the ability to download the controller protocol to the OIT. To install the STEPware-100 Demo Software on your computer, click on the following link to download and then execute the swdsetup.exe file.

Download STEPware-100 Demo Software (725 KB)



This page last modified on 05/26/2011.
Maintained by
Material Copyright © 2000-2011 Maple Systems, Inc.