Support Center - Help topic
Related Links
Software Downloads & Upgrades
Manuals & Guides
- HMC Series Installation Guide
- MAPware-7000 Programming Manual
- MAPware-7000 Ladder Logic Guide
- Mapware-7000 Getting Started Guide
- HMC3000 I/O Module Guide
- HMC7000 I/O Module Guide
- MAPware-7000 IEC61131 Programming Guide
Videos
- Product Overview
- Part 1: Introduction and Installation
- Part 2: Creating a Native Ladder Project
- Part 3: Adding and Initializing Tags
- Part 4: Adding Logic
- Part 5: Creating an HMI Screen
- Part 6: Duplicationg an HMI Screen
- Part 7: Downloading and Testing the Project
- Part 8: Creating an IEC Project
- Part 9: Creating a UDFB
- Part 10: Adding a Structure Text UDFB
- Part 11: Adding Power Up and Main Routine Logic
- Part 12: Creating Screen Objects
- Part 13: Downloading the Project and Online Monitoring
- Data Logger and Trend Displays
Sample Projects
Contact Us
Can't find what you're looking for in our Tech Support Library? Send us a message.
Contact Us
What is the Data Logger in MAPware-7000?
Tags:
Feature
Data
Trend
The Data Logger available in the HMI + PLC (HMC) Series is used to record values of tags over time. Data is collected and stored in the HMI + PLC's non-volatile memory or attached SD card and can be displayed on the HMI + PLC screen using the Historical Trend or Real Time Trend objects.
The Data Logging feature is most often used for data acquisition where the HMI + PLC gathers and saves important process information for analysis. Data logging is configured in groups. Up to four groups can be created, and each group can have a maximum of 30 registers. Up to 20MB of internal memory or 32GB of external SD card memory can be configured for data logging.
Data logging can start immediately on power up or the start times can be pre-configured in the Data Logger Start Time/Stop Time fields. Data logging start and stop times can be controlled by a push-button or a system bit. Data logged to the external SD card can be sent to an external FTP server at a user specified periodic interval (HMC3000 Series only).
The Data Logging feature is most often used for data acquisition where the HMI + PLC gathers and saves important process information for analysis. Data logging is configured in groups. Up to four groups can be created, and each group can have a maximum of 30 registers. Up to 20MB of internal memory or 32GB of external SD card memory can be configured for data logging.
Data logging can start immediately on power up or the start times can be pre-configured in the Data Logger Start Time/Stop Time fields. Data logging start and stop times can be controlled by a push-button or a system bit. Data logged to the external SD card can be sent to an external FTP server at a user specified periodic interval (HMC3000 Series only).
Content Created by David Franzwa