Support Center - Help topic
Related Links
Software Downloads & Upgrades
Manuals & Guides
Videos
Sample Projects
Controller Information Sheets
See Our List of Controller Information Sheets Communication Cables
See Our List of Communication Cables Contact Us
Can't find what you're looking for in our Tech Support Library? Send us a message.
Contact Us
Troubleshooting CANbus SAE J1939 connection when no data is showing up.
Tags:
FAQ
CANbus
Don't forget your terminating resistors! Both ends of the CAN bus should be terminated with 120O resistors. Forgetting the resistors can result in signal reflection which will corrupt the data packet and ultimately result in no data.
IMPORTANT NOTE: HMI5070P has
built-in termination resistor, so a termination resistor is only required for the opposite end of the
network cable. The HMI5070Pv2 does not have a built-in termination resistor, so resistors are
required on both ends of the network.
Content Created by Derek Thompson