Support Center - Help topic
Related Links
Software Downloads & Upgrades
Manuals & Guides
Videos
Sample Projects
Controller Information Sheets
See Our List of Controller Information Sheets Communication Cables
See Our List of Communication Cables Contact Us
Can't find what you're looking for in our Tech Support Library? Send us a message.
Contact Us
RW Memory is not saved after cycling power on the HMI
Tags:
FAQ
Data
Recipe
When making any changes to the
RW memory area, the changes are stored in RAM memory initially and after 60
seconds, written to permanent flash memory. Therefore, when testing the RW
memory, make sure you wait at least 60 seconds before cycling power on the HMI
or the changes will not be saved permanently. Here is an explanation from the
“EBPro Programming Manual.”
As described above, there is a
system bit (LB-9029) that you can use to force the HMI to save any changes to
the RW memory immediately by turning the bit ON.
Content Created by David Franzwa