Support Center - Help topic

Home > Support Center > Search > Help Topic
Contact Us
Can't find what you're looking for in our Tech Support Library? Send us a message.
Contact Us
RW Memory is not saved after cycling power on the HMI
Tags: FAQ Data Recipe

When making any changes to the RW memory area, the changes are stored in RAM memory initially and after 60 seconds, written to permanent flash memory. Therefore, when testing the RW memory, make sure you wait at least 60 seconds before cycling power on the HMI or the changes will not be saved permanently. Here is an explanation from the “EBPro Programming Manual.”

As described above, there is a system bit (LB-9029) that you can use to force the HMI to save any changes to the RW memory immediately by turning the bit ON.

Content Created by David Franzwa