1. Connect a USB flash
drive to HMI #1. The Download/Upload window pops up.
2. Select “Upload” and
then “Upload History Files,” then enter the password (default: 111111) and click
OK.
3.
In the “Pick a
Directory” window, click the + sign in front of usbdisk and select the
“disk_a_1” directory. Click OK and the History files will get uploaded to the
USB flash drive.
4.
Unplug the USB flash
drive from HMI #1 and plug it into HMI #2. The Download/Upload window pops up.
5.
Select “Download”
and then “Download History Files,” then enter the password (default: 111111)
and click OK.
6.
In the “Pick a
Directory” window, click the + sign in front of usbdisk and select the
“disk_a_1” directory. Click OK and the History files will get downloaded to the
USB flash drive.
7. IMPORTANT: When the download is complete, the Download/Upload window reappears. Select “Restart project and exit.” This will update the recipe data in the HMI.
Note: The cMT Series menus are
slightly different, but the same basic procedure applies.
This method cannot be used with the cMT-SVR. Use the Upload/Download feature in
EBPro or the Utility Manager instead.